HYDAC High Pressure Power Unit HP

HYDAC High-Pressure Power Unit HP has an operating pressure up to 500 bar and flow rate up to 5.25 l/min. It presents very low noise emissions due to noise-reducing cast housing.

Features:

• High specific performance with simultaneously compact construction
• Simple electrical installation by means of terminal boxes in the upper part of the power unit
• Also, a radial piston pump with an oil-immersed motor in a stable housing
• The versatile controls are available

Characteristics:

• Flow rate: 0.3 to 5.25 l/min
• Operating pressure: max. 500 bar
• Switch-on time: S2 (short-term operation) S3 (intermittent duty)
• Motor: Pn = 1.2 KW ... 2.2 KW
• Voltages: 3 Ph. 230/400V -50 Hz (others upon request)
• IP rating: DIN EN 60034-5 min IP54
• Pump parameters Vg.: 0.3 cm³/rev. ... 5.25 cm³/rev
• Tank volume: 1.1 – 7.0 l
• Discharge volume: 0.7 – 5.8 l
• Operating fluid: hydraulic oil according to DIN 51524 part 1 and 2
• Viscosity range: 10 – 380 mm²/s is recommended
• Filtering: Maximum permissible degree of contamination of the operating fluid in accordance with ISO 4406 Class 21/19/16
• Cooling: Convection cooling / air cooling
• Weight: from 7.2 to 25.7 kg
• Return quantity: up to max. 10 l/min
• Installation position: vertical
• Operating fluid temperature: -20°C to max. +80°C
• And ambient temperature range: -20°C to max. +40°C