HYDAC DC Compact Power Units DC1

HYDAC DC1 Power Unit has a max operating pressure of 250 bar. It presents a very low noise, thanks to the special design.

Features:

• Minimum installation dimensions resulting from small flange dimension
• Very low noise, thanks to special design
• Different hydraulic controls possible in the same flange, through flexible
• An equipment with cartridge valves and/or flanging-on of manifolds and stacking systems.

Characteristics: 

• Flow rate: up to 18.4 l/min
• Operating pressure: max. 250 bar
• Peak pressure: up to max. 300 bar (upon request)
• Switch-on time: S2 (short-term operation) S3 (intermittent duty)
• Motor: Pn = 1.7 KW ... 3.0 KW
• Motor voltages: 12 and 24 Volt
• IP rating: DIN EN 60034-5 min IP54
• Pump parameters Vg.: 1.0 cm³/rev. ... 8.0 cm³/rev
• Tank volume: 1.8 – 8.4 l
• Discharge volume: 1.2 – 7.8 l
• Operating fluid: hydraulic oil according to DIN 51524 part 1 and 2
• Viscosity range: 10 – 380 mm²/s is recommended
• Filtration: Max. permissible degree of contamination of the operating fluids in accordance with ISO 4406 Class 21/19/16
• Cooling: Convection cooling
• Weight: from 15 to 25 kg
• Return flow: up to max. 40 l/min
• Installation position: vertical, horizontal
• Operating fluid temperature: -20°C to max. +80°C
• Ambient temperature range: -20°C to max. +40°C