HYDAC Compact Power Units CA

HYDAC Compact Power Units CA has operating pressure up to 250 bar and flow rate up to 12.6 l/min. It is a very compact and low-noise system. This is due to the installation of the motor pump group under the oil in the tank.

Features:

• Up to 250 bar
• Up to 12.6 l/min
• it is suitable in accordance with EN60034-1
• For short-term operation S2
• For intermittent duty S3
• It has a high leakage safety and stability through continuous steel tanks
• A minimum installation dimensions resulting from small flange dimension
• Also, a simple electrical installation through the standard terminal board at the front
• A high-performance density through the smallest possible installation size conditions

Characteristics: 

• Delivery rate: 1.3 to 12.6 l/min
• Operating pressure: max. 250 bar
• Switch-on duration: S2 (short-term operation) S3 (intermittent duty)
• Motor: Pn = 0.55 KW ... 3.0 KW
• Motor voltages: 3Ph. 230/400V -50 Hz (others upon request)
• IP rating: DIN EN 60034-5 min IP54
• Pump parameters Vg.: 1.0 cm³/rev. ... 4.75 cm³/rev
• Tank volume: 5.0 – 9.0 l
• Discharge volume: 2.5 – 7.3 l
• Operating fluid: hydraulic oil according to DIN 51524 part 1 and 2
• Viscosity range: 10 – 380 mm²/s is recommended
• Filtration: Max. permissible degree of contamination of the operating fluids in accordance with ISO 4406 Class 21/19/16
• Cooling: Convection cooling
• Weight: from 12 to 24 kg
• Return quantity: up to max. 25 l/min
• Installation position: vertical, horizontal
• Operating fluid temperature: -20°C to max. +80°C
• And ambient temperature range: -20°C to max. +40°C