Diaphragm Accumulators

“All our accumulators are dispatched without pre-charge. A pre-charge incurs additional cost. For more information contact us on info@hydac.com.au or call us on 03 9272 8900.”

Fluids are practically incompressible and cannot, therefore, store pressure energy. Also, the compressibility of a gas serves in hydraulic accumulators for storing fluids. HYDAC diaphragm accumulators are based on this principle, using nitrogen as the compressible medium.

HYDAC diaphragm accumulator with nitrogen compressible medium

Indeed, a diaphragm accumulator consists of a fluid section and a gas section with the diaphragm acting as the gas-proof screen.

Therefore, there is a connection of the fluid section to the hydraulic circuit so that the diaphragm accumulator draws in the fluid when the pressure increases. Therefore, it compresses the gas. When the pressure drops, the compressed gas expands and forces the stored fluid into the circuit.

Moreover, there is a valve poppet at the base of the diaphragm. This valve shuts off the hydraulic outlet when the accumulator is completely empty and thus prevents damage to the diaphragm.

Note:

What's more, it is possible to fit the HYDAC diaphragm accumulators with an HYDAC Safety and Shut-off Block. This will lead to the compliance of the regulations of the Pressure Equipment Directive PED 97/23/EC and the German regulations on health & safety at work (Betr.Sich.V.).

See catalogue section: Safety and shut-off block SAF/DSV No. 3.551

Features:

• A design optimised for function and weight,
• A choice of installation positions,
• Also, there is no pressure differential between fluid side and gas side,
• A low-maintenance and long service life.

Specifications:

• Nominal volume: 0.075 ... 4 l,
• Permitted operating pressure: 40 ... 750 bar,
• Elastomers: NBR, ECO, IIR, FKM (FPM) and others,
• Accumulator shell materials: carbon steel, stainless steel, aluminium and others.